Follow Milab Microphones on:  Facebook  /  Instagram  /  Twitter  /  YouTube
 


Saxophone clamp

Article number: 1148

Clamp to be fitted on saxophones or other brass instruments. Easy to fit on the instrument and tightened with the knob. 10 cm long flexible gooseneck.

Suitable for: VM-44 Link
Saxophone clamp

Phantom power supply

Article number: 1300

For situations when external power is required. Provides 48 V and can be used with one or two microphones. Female input XLR and male output XLR connectors.

Dimensions:
Length 180 mm
Width 130 mm
Height 55 mm
Net weight 600 g

Suitable for: DC-196, DC-96C, DC-96B, VIP-50, LSR-3000, VM-44 Classic, VM-44 Gooseneck, VM-44 Link, BDM-01
Phantom power supply

Stand holder

Article number: 3127

Microphone holder for stands with 3/8" and 5/8" threading. Manufactured by König & Meyer.

Suitable for: DC-196, DC-96C, DC-96B, LSR-3000, BDM-01
Stand holder

Stand adapter

Article number: 3150

Ball joint microphone stand adapter for stands with 3/8" threading. Manufactured by König & Meyer.

Suitable for: VIP-50
Stand adapter

Shockmount

Article number: 3221

Rubber shock microphone holder. Reduces shock noise and vibrations coming through the stand. Fits microphones with diameter 21 mm. For stands with 3/8" and 5/8" threading.

Suitable for: VM-44 Classic
Shockmount

Shockmount

Article number: 3227

Rubber shock microphone holder. Reduces shock noise and vibrations coming through the stand. Fits microphones with diameter 27 mm. For stands with 3/8" and 5/8" threading.

Suitable for: DC-196, DC-196 Platinum Edition, DC-96C, DC-96B, LSR-3000, BDM-01
Shockmount

Shockmount

Article number: 3260

The 3260 is a Rycote InVision USM shockmount that has been custom modified for the Milab SRND 360. The USM makes use of Rycote's patented vibration-resistant Lyre mount. In controlled tests at the Rycote factory, the USM provided up to twice the isolation of traditional microphone suspension systems.

Suitable for: SRND 360
Shockmount

TS-44 Miniature table stand

Article number: 3344

Small and easily handled table stand made from solid brass with a black chrome matte finish. Built-in rubber shock absorber to suppress noise from table or desk. The miniature stand has a rubber mounted 3/8" threading for connection with the microphone holder. Also equipped with non-slip shock absorber bumpers on housing bottom.

Dimensions:
Net weight 290 g
Height 20 mm
Diameter 64 mm

PDF brochure

Suitable for: VM-44 Classic, VM-44 Link
TS-44 Miniature table stand

BLM-44

Article number: 3346

Plate that turns the VM-44 Link into a Boundary Layer microphone.

Suitable for: VM-44 Link
BLM-44

TS-84 Table stand

Article number: 3384

Robust table stand made from solid brass, for situations where the TS-44 is too light. Built-in rubber shock absorber to suppress noise from table or desk. The stand has a rubber mounted 3/8" threading for connection with the microphone holder. Also equipped with non-slip shock absorber bumpers on housing bottom.

Dimensions:
Net weight 470 g
Diameter 84 mm

Suitable for: VM-44 Classic, VM-44 Gooseneck, VM-44 Link, DC-196, DC-96B, DC-96C
TS-84 Table stand

Windscreen

Article number: 3402

Open-cell acoustical foam for free passage of sound without altering the frequency response. While remaining acoustically transparent the windscreen reduces wind noise, pop noises and breath sounds. Produced by Rycote.

Suitable for: LSR-3000, BDM-01
Windscreen

Windscreen

Article number: 3403

Open-cell acoustical foam for free passage of sound without altering the frequency response. While remaining acoustically transparent the windscreen reduces wind noise, pop noises and breath sounds. Produced by Rycote.

Suitable for: DC-196, DC-196 Platinum Edition, DC-96C, DC-96B
Windscreen

Windscreen

Article number: 3404

Open-cell acoustical foam for free passage of sound without altering the frequency response. While remaining acoustically transparent the windscreen reduces wind noise, pop noises and breath sounds. Produced by Rycote.

Suitable for: VIP-50
Windscreen

Windscreen

Article number: 3406

Open-cell acoustical foam for free passage of sound without altering the frequency response. While remaining acoustically transparent the windscreen reduces wind noise, pop noises and breath sounds. Produced by Rycote.

Suitable for: VM-44 Classic, VM-44 Gooseneck, VM-44 Link
Windscreen

Pop shield

Article number: 3500

Acoustically transparent pop filter for recording and broadcasting studios.

Suitable for: DC-196, DC-96C, DC-96B, VIP-50, VM-44 Classic
Pop shield
 
 
Terms of use  /  Sitemap  /  Search site  /  Contact
© Copyright Milab Microphones AB. All rights reserved.